[1]宋炜宁,张佩华*.基于三维模拟的智能文胸压力舒适性优化设计[J].服装学报,2023,8(04):315-322.
　SONG Weining,ZHANG Peihua*.Pressure Comfort Optimization Design of Intelligent Bra Based on 3D Simulation[J].Journal of Clothing Research,2023,8(04):315-322.
点击复制

基于三维模拟的智能文胸压力舒适性优化设计()
分享到：

《服装学报》[ISSN:2096-1928/CN:32-1864/TS]

卷:
第8卷
期数:
2023年04期
页码:
315-322
栏目:
智能服装
出版日期:
2023-08-30

文章信息/Info

Title:
Pressure Comfort Optimization Design of Intelligent Bra Based on 3D Simulation
作者:
宋炜宁;  张佩华*
东华大学 纺织学院,上海 201620
Author(s):
SONG Weining;  ZHANG Peihua*
College of Textiles, Donghua University, Shanghai 201620, China
分类号:
TS 941.71
文献标志码:
A
摘要:
基于三维模拟技术,通过三维建模和压力模拟分析,对一款监测乳房健康状况的智能文胸进行结构优化,以提高其压力舒适性,提升传感器与文胸结构的适配程度。结果表明,罩杯处添加断缝、增加肩带与下扒厚度、后背采用工字型设计并添加孔洞、缩减里片数量、调整传感器裁片与开口位置,能够提升文胸的穿着舒适性; 经结构优化设计后的智能文胸在下扒上侧、乳上部、乳下部、肩部处压力分别降低了87.35%,46.91%,91.16%,30.75%,证明了模拟结果的有效性。
Abstract:
This paper optimized the structure of an intelligent bra with breast health status monitoring, through 3D modeling and pressure simulation analysis based on 3D simulation technology, in order to improve its pressure comfort and enhance the adaptability of its sensor and bra structure. The results show that the wearing comfort of the bra can be significantly improved by adding broken seams at the cup, increasing the thickness of the shoulder strap and the lower girth, adopting the I-shaped design and adding holes at the back, reducing the number of linings, adjusting the sensor cutting and opening position. After structural optimization, the pressure of the intelligent bra at the upper side of lower girth, upper breast, lower breast, and shoulder are decreased by 87.35%, 46.91%, 91.16% and 30.89%, respectively, and the actual test proves that the simulation results are effective.

参考文献/References:

[1] 巴桂玲. 基于CLO_3D技术的标准体男裤上裆结构优化研究[J]. 鞋类工艺与设计, 2022, 2(13): 9-11.
BA Guiling. Research on the optimization of upper crotch structure of standard men’s pants based on CLO_3D technology[J]. Shoes Technology and Design, 2022, 2(13): 9-11.(in Chinese)
[2] 王朝晖, 程宁波. 智能服装的应用现状及发展方向[J]. 服装学报, 2021, 6(5): 451- 456.
WANG Zhaohui, CHENG Ningbo. Application and deve-lopment trends of smart clothing[J]. Journal of Clothing Research, 2021, 6(5): 451- 456.(in Chinese)
[3] 齐慧, 卢建军, 卢致文. 女性健康类智能可穿戴设备现状与发展趋势[J]. 针织工业, 2020(1): 55-58.
QI Hui, LU Jianjun, LU Zhiwen. Development status and trends of smart wearable devices for women’s health[J]. Knitting Industries, 2020(1): 55-58.(in Chinese)
[4] 陆培华, 朱达辉, 孙洁, 等. 一种抗菌透气的穿戴式乳腺癌智能监测内衣: 113729318A[P]. 2021-12-03.
[5] 陆培华, 朱达辉, 汤松, 等. 一种具有生物参数测量功能的乳腺癌智能监测内衣: 113768210A[P]. 2021-12-10.
[6] 黄伟萍, 梅先明, 张丽英, 等. 一种多点监测人体胸部温度的文胸及胸部温度分析方法: 108741264A[P]. 2018-11-06.
[7] 赵晶. 基于内衣人台的文胸基础纸样优化研究[D]. 北京: 北京服装学院, 2016.
[8] 杨焰雁. 文胸基础纸样设计方法优化研究[D]. 上海: 东华大学, 2009.
[9] 祁倩. 针对中年女性胸部下垂情况的文胸结构优化研究[D]. 西安: 西安工程大学, 2014.
[10] 姚远. 基于有限元分析的多材质文胸钢圈设计方法研究[D]. 杭州: 浙江理工大学, 2016.
[11] 洪文进,TAJUDDIN R M, 唐颖, 等. 基于CLO 3D技术的女性智能运动内衣设计方法[J]. 上海纺织科技, 2022, 50(3): 22-26.
HONG Wenjin, TAJUDDIN R M, TANG Ying, et al. Development of women’s smart sports underwear based on CLO 3D technology[J]. Shanghai Textile Science and Technology, 2022, 50(3): 22-26.(in Chinese)
[12] 成恬恬. 基于CLO 3D的文胸虚拟仿真设计[J]. 国际纺织导报, 2020, 48(10): 48-51.
CHENG Tiantian. Research on bra virtual simulation design based on CLO 3D[J]. Melliand China, 2020, 48(10): 48-51.(in Chinese)
[13] 于欣禾, 王建萍. 基于虚拟服装压力的针织骑行服版样优化方法[J]. 服装学报, 2019, 4(2): 127-135.
YU Xinhe, WANG Jianping. Optimization method of knitted cycling clothes’ patterns based on virtual clothing pressure[J]. Journal of Clothing Research, 2019, 4(2): 127-135.(in Chinese)
[14] 陈星毅,吴志明.弹性针织服装的压力舒适性研究[J].天津工业大学学报,2009,28(5):33-37.
CHEN Xingyi, WU Zhiming. Study on pressure comfort of elastic knitting garment[J]. Journal of Tianjin Polyte-chnic University, 2009, 28(5): 33-37.(in Chinese)
(责任编辑:沈天琦)

更新日期/Last Update: 2023-08-30