[1]王二南,董智佳*,蒋高明,等.经编全成形连体骑行服结构与工艺设计[J].服装学报,2025,10(06):498-505.
　WANG Ernan,DONG Zhijia*,JIANG Gaoming,et al.Structure and Process Design of Warp-Knitted Fully-Fashioned One-Piece Cycling Suits[J].Journal of Clothing Research,2025,10(06):498-505.
点击复制

经编全成形连体骑行服结构与工艺设计()

《服装学报》[ISSN:2096-1928/CN:32-1864/TS]

卷:
第10卷
期数:
2025年06期
页码:
498-505
栏目:
针织服装
出版日期:
2025-12-30

文章信息/Info

Title:
Structure and Process Design of Warp-Knitted Fully-Fashioned One-Piece Cycling Suits
作者:
王二南1;  董智佳*1;  蒋高明1;  储开元2;  马丕波1
1. 江南大学 针织技术教育部工程研究中心,江苏 无锡 214122; 2. 江苏华宜针织有限公司,江苏 宜兴 214200
Author(s):
WANG Ernan1;  DONG Zhijia*1;  JIANG Gaoming1;  CHU Kaiyuan2;  MA Pibo1
1. Engineering Research Center of Knitting Technology, Ministry of Education, Jiangnan University, Wuxi 214122, China; 2. Jiangsu Huayi Knitting Co., Ltd., Yixing 214200, China
分类号:
TS 184.5
文献标志码:
A
摘要:
针对现有连体骑行服弹力延伸性不足及织物结构单一的问题,通过分析人体骑行动态皮肤拉伸变化与人体躯干热湿分布情况,对连体骑行服进行功能分区,分别在拉伸较大部位和出汗量较大部位选用不同贾卡组织,并结合经编全成形技术,采用色块分区法对服装不同功能分区填充适合的贾卡组织。对织造出的贾卡组织面料进行拉伸弹性与舒适压测试,并选取牵拉密度为12横列/cm的贾卡试样面料进行透气、透湿测试。结果表明:非网孔织物拉伸弹性较好,适宜用作连体骑行服主体面料; 网孔组织适宜用在吸湿透气性能要求高的部位。通过不同部位选用不同贾卡组织能改善骑行服服用性能,为骑行装备开发提供借鉴。
Abstract:
Aiming at the current issues of insufficient elastic stretchability and monotonous fabric structure in existing one-piece cycling suits, this study conducted functional zoning of the one-piece cycling suit by analyzing the dynamic skin stretching variations during cycling and the thermal-moisture distribution across the human torso. In areas with greater stretching, a relaxed jacquard structure fabric was selected, while mesh structures were applied in regions with higher perspiration. Integrating warp-knitting fully-fashioned technology, a color-block zoning method was employed to fill corresponding jacquard structures in different functional zones of the garment. The knitted jacquard fabrics were tested for stretch elasticity and comfort pressure, and jacquard sample fabrics with a density of 12 were selected for breathability and moisture permeability tests. The results indicate that non-mesh fabrics exhibit better stretch elasticity, making them suitable as the main material for one-piece cycling suits, while mesh structures are appropriate for areas requiring high moisture absorption and breathability. The use of different jacquard structures can improve the wearing performance, thereby providing a reference for the development of cycling equipment.

参考文献/References:

[1] 曲超群, 张琦, 董智佳, 等. 经编全成形运动背心的款式结构及工艺设计[J]. 上海纺织科技, 2020, 48(6): 44- 46, 59.
QU Chaoqun, ZHANG Qi, DONG Zhijia, et al. Style structure and process design of warp-knitted full-form sports vest[J]. Shanghai Textile Science and Technology, 2020, 48(6): 44- 46, 59.(in Chinese)
[2] 徐丽玉, 董智佳, 丛洪莲, 等. 经编全成形室内健身服的尺寸预测[J]. 纺织学报, 2018, 39(4): 100-105.
XU Liyu, DONG Zhijia, CONG Honglian, et al. Size prediction of warp-knitted fully-fashioned indoor sport clothes[J]. Journal of Textile Research, 2018, 39(4): 100-105.(in Chinese)
[3] 董智佳, 蒋高明, 丛洪莲, 等. 经编全成形运动装款式建模与工艺实现[J]. 纺织学报, 2018, 39(2): 38- 42.
DONG Zhijia, JIANG Gaoming, CONG Honglian, et al. Garment model and process realization of warp-knitted fully-fashioned sportswear[J]. Journal of Textile Research, 2018, 39(2): 38- 42.(in Chinese)
[4] 于欣禾, 王建萍. 基于虚拟服装压力的针织骑行服样板优化方法[J]. 服装学报, 2019, 4(2): 127-135.
YU Xinhe, WANG Jianping. Optimization method of knitted cycling clothes’ patterns based on virtual clothing pressure[J]. Journal of Clothing Research, 2019, 4(2): 127-135.(in Chinese)
[5] 仇惠玲, 刘雅玲. 浅析骑行运动服装的功能性设计[J]. 青春岁月, 2021(14): 56-57.
QIU Huiling, LIU Yaling. Analysis on functional design of cycling sportswear[J]. Youth Years, 2021(14): 56-57.(in Chinese)
[6] 吴丽华, 曹新锋, 王福娟, 等. 基于运动力学的自行车骑行服优化设计研究[J]. 山东纺织经济, 2023, 40(8): 20-22, 26.
WU Lihua, CAO Xinfeng, WANG Fujuan, et al. Research on optimization design of cycling clothing based on motion mechanics[J]. Shandong Textile Economy, 2023, 40(8): 20-22, 26.(in Chinese)
[7] 李秀青, 刘需, 赵欲晓. 骑行运动中男子下肢体表尺寸变化规律[J]. 纺织学报, 2017, 38(8): 120-126.
LI Xiuqing, LIU Xu, ZHAO Yuxiao. Study on size changes of man’s lower limb body in riding motion[J]. Journal of Textile Research, 2017, 38(8): 120-126.(in Chinese)
[8] 骆顺华. 功能性紧身运动服装设计方法论——以紧身骑行裤为例[M]. 北京: 中国纺织出版社, 2020: 45-55.
[9] 骆顺华. 功能性紧身骑行短裤的结构分区设计[J]. 针织工业, 2020(10): 66-70.
LUO Shunhua. Structural partition design of functional tight cycling shorts[J]. Knitting Industries, 2020(10): 66-70.(in Chinese)
[10] 张囡. 经编全成型运动男背心的结构与性能研究[D]. 无锡: 江南大学, 2019: 17-21.
[11] 董智佳, 郭燕雨秋, 刘海桑, 等. 经编全成形镂空紧身衣的结构设计与实现[J]. 纺织学报, 2023, 44(12): 130-137.
DONG Zhijia, GUO Yanyuqiu, LIU Haisang, et al. Structural design and realization of warp-knitted fully formed hollow maillot[J]. Journal of Textile Research, 2023, 44(12): 130-137.(in Chinese)
[12] 姚思宏, 董智佳, 蒋高明, 等. 零裁耗经编成形双层裙裤结构设计与建模[J]. 服装学报, 2023, 8(5): 411- 416.
YAO Sihong, DONG Zhijia, JIANG Gaoming, et al. Structure design and modeling of zero cutting loss warp-knitted fully-formed double-layer culottes[J]. Journal of Clothing Research, 2023, 8(5): 411- 416.(in Chinese)
[13] 郭燕雨秋, 董智佳, 储云明, 等. 经编全成形打底裙的结构设计与工艺[J]. 针织工业, 2023(11): 63- 66.
GUO Yanyuqiu, DONG Zhijia, CHU Yunming, et al. Structure design and technology of warp knitted fully-fashioned bottom skirt[J]. Knitting Industries, 2023(11): 63- 66.(in Chinese)
[14] 王伶俐. 弹性针织物拉伸性能与服装压力关系的研究[D]. 北京: 北京服装学院, 2013: 11-12.
[15] 中华人民共和国工业和信息化部. 针织物拉伸弹性回复率试验方法: FZ/T 70006—2022[S]. 北京: 中国标准出版社, 2022: 4.
[16] 中国纺织总会标准化研究所.纺织品 织造透气性的测定:GB/T 5453—1997[S].北京:中国标准出版社,1997.
[17] 纺织工业部标准化研究所.织物透湿量测定方法 透湿杯法:GB/T 12704—1991[S].北京:中国标准出版社,1991.
[18]中华人民共和国国家市场监督管理总局，中国国家标准化管理委员会. 服装号型 男子: GB/T 1335.1—2008[S]. 北京: 中国标准出版社, 2008.
[19] 袁围围, 孙超, 刘莉, 等. 自由式滑雪竞赛服面料优化及其压力舒适性评价[J]. 毛纺科技, 2022, 50(2): 8-14, 7.
YUAN Weiwei, SUN Chao, LIU Li, et al. Fabric optimization and pressure comfort evaluation of freestyle skiing competition suit[J]. Wool Textile Journal, 2022, 50(2): 8-14, 7.(in Chinese)
[20] 王永荣, 罗胜利, 廖银琳, 等. 女性服装压力舒适阈限的测试与研究[J]. 纺织学报, 2018, 39(3): 132-136.
WANG Yongrong, LUO Shengli, LIAO Yinlin, et al. Test and study of pressure comfort threshold of female’s garment[J]. Journal of Textile Research, 2018, 39(3): 132-136.(in Chinese)
(责任编辑:卢 杰)

更新日期/Last Update: 2025-12-30