[1]丁 慧,王新泉,郭建丽.横编脱圈技术在产品设计中的应用[J].服装学报,2020,5(05):411-414.
　DING Hui,WANG Xinquan,GUO Jianli.Flat Knitting Remove-Loop Technology on the Application in Product Design[J].Journal of Clothing Research,2020,5(05):411-414.
点击复制

横编脱圈技术在产品设计中的应用()
分享到：

《服装学报》[ISSN:2096-1928/CN:32-1864/TS]

卷:
第5卷
期数:
2020年05期
页码:
411-414
栏目:
服装工程技术
出版日期:
2020-10-31

文章信息/Info

Title:
Flat Knitting Remove-Loop Technology on the Application in Product Design
作者:
丁 慧;  王新泉;  郭建丽
内蒙古鹿王羊绒有限公司(中国),内蒙古 包头 014040
Author(s):
DING Hui;  WANG Xinquan;  GUO Jianli
Inner Mongolia King Deer Cashmere Co., Ltd., Baotou 014040,China
分类号:
TS 186.2
文献标志码:
A
摘要:
介绍3种采用电脑横编机脱圈技术原理在产品设计中的应用方法,包括纱线局部带入、增大邻近线圈、显现花型图案。通过分析线圈在编织过程中从织针上脱落的形成原理,分别绘制出每种方法的线圈结构图和编织工艺图,论述脱圈技术在产品设计中的编织方法,并提出脱圈设计的技术要点。结果表明,通过应用这3种脱圈技术,可以更顺利的实现毛衫类创新花样的编织,保证产品质量,提高生产效率。
Abstract:
Three methods were introduced using remove-loop technology of computerized flat knitting machine applied in product design, including partial introduction of yarns, enlargement of adjacent loops and the display of flower patterns. By analyzing the principle of remove-looping in the knitting process of knitting needles, the loop structure diagram and knitting technology diagram were drawn, respectively. The knitting method of the unlooping technology in the product design was discussed, and the technical points of the remove-looping design were proposed. The results show that by introducing three methods of the unlooping technologies, it plays an important role in the organization research of innovative pattern of sweater, the guarantee of the product quality and in the improvement of production efficiency.

参考文献/References:

[1] 刘欣蕾,陈瑶,虞淑锐,等.毛衫织物组织的创新设计与工艺[J].毛纺科技,2019(2):18-21.
LIU Xinlei, CHEN Yao, YU Shurui, et al.Design and technology of the knitted fabrics on computerized flat knitting machine[J]. Wool Textile Journal, 2019(2): 18-21.(in Chinese)
[2] 冯照峰.喷气织机纬纱筒子脱圈原因及解决方案[J].上海纺织科技,2013(5):11,48.
FENG Zhaofeng. Causes and settlement of yarn taking off on the weft yarn cone in air jet weaving[J]. Shanghai Textile Science and Technology, 2013(5): 11,48.(in Chinese)
[3] 陈霞.纬编针织脱圈走纱分析与防走纱工艺研究[J].上海纺织科技,2008(8):42- 44,46.
CHEN Xia. Analyzing about laddering in weft knitting and study of technology for laddering prevention[J]. Shanghai Textile Science and Technology, 2008(8): 42- 44,46.(in Chinese)
[4] 余水玉.棉氨弹力针织物线圈结构模型的建立[J].针织工业,2017(12):61- 64.
YU Shuiyu. Establishment of loop structure model of cotton and spandex knitted fabric[J]. Knitting Industries, 2017(12): 61- 64.(in Chinese)
[5] 李菲,毛莉莉.传统毛衫图案的创新设计方法研究[J].针织工业,2019(2):13-16.
LI Fei, MAO Lili. Innovative design method for traditional cardigan patterns[J]. Knitting Industries, 2019(2): 13-16.(in Chinese)
[6] 刘大玮,郭瑞萍.纬编针织复合组织创新设计[J].针织工业,2017(5):22-25.
LIU Dawei, GUO Ruiping. Innovative design of weft knitted composite structure[J]. Knitting Industries, 2017(5): 22-25.(in Chinese)
[7] 孟家光.羊毛衫设计与生产工艺[M].北京:中国纺织出版社,2006.
[8] 王花娥.集圈工艺参数对单面集圈织物性能的影响[J].纺织学报,2016,37(8):54-58.
WANG Hua’e. Influence of tuck ratio and times on proper-ties of single tuck sweater fabric[J]. Journal of Textile Research, 2016,37(8): 54-58.(in Chinese)
[9] 毛成栋.套圈结构钩编花边编织技术研究[J].针织工业,2016(10):14-16.
MAO Chengdong. Study of knitting technology of crochet lace with topping-on structure[J]. Knitting Industries, 2016(10): 14-16.(in Chinese)
(责任编辑:卢 杰)

更新日期/Last Update: 2020-08-30