[1]雷启然,刘 琴,尚笑梅*.基于服装号型的参数化人体模型控制要素分析[J].服装学报,2019,4(04):305-310.
　LEI Qiran,LIU Qin,SHANG Xiaomei*.Human Body Control Factors Analysis of Parametric Human Modeling Based on Standard Sizing Systems of Garments[J].Journal of Clothing Research,2019,4(04):305-310.
点击复制

基于服装号型的参数化人体模型控制要素分析()
分享到：

《服装学报》[ISSN:2096-1928/CN:32-1864/TS]

卷:
第4卷
期数:
2019年04期
页码:
305-310
栏目:
服装人体工学
出版日期:
2019-08-30

文章信息/Info

Title:
Human Body Control Factors Analysis of Parametric Human Modeling Based on Standard Sizing Systems of Garments
作者:
雷启然;  刘 琴;  尚笑梅*
苏州大学 纺织与服装工程学院,江苏 苏州 215021
Author(s):
LEI Qiran;  LIU Qin;  SHANG Xiaomei*
College of Textile and Clothing Engineering,Soochow University,Suzhou 215021,China
分类号:
TS 941.17
文献标志码:
A
摘要:
为建立基于某一服装号型的参数化人体模型,结合GB/T 1335.1—2008,从人体数据库中筛选出129组170/88A号型的江苏地区男青年人体数据,包括身高、颈椎高、左肩高、腰围高、内胯高、颈围、胸围、胸宽、总肩宽、臂根围、腰围、臀围、体质量13项; 采用SPSS统计软件分析数据,找出控制要素,建立回归方程。采用号型中间体法、基本分析法和层次分析法分析人体数据,获得能够覆盖该号型大部分人体尺寸的标准人体内模的各控制要素尺寸。结果显示,结合号型分类和回归方程,可将身高、体质量、胸围、腰围、肩宽作为参数,推断其他控制要素尺寸。控制要素尺寸以号型中间体数值作为参考,结合基本分析法和层次分析法对其进行判断,最终选择代表性数据作为参数化人体模型的控制要素数值。
Abstract:
In order to establish a parametric mannequin based on a certain garment size, combining standard of GB/T 1335.1—2008, the body data, including height, cervical height, left acromion height, waist height, perineum point height, neck girth, bust girth, bust width, shoulder width, armhole girth, waist girth, hip girth, body weigh, of 129 young men of type 170/88A in Jiangsu Province were selected. The SPSS statistical software was used for data analysis to find out the relevant control factors and establish regression equations. In addition, this paper analyzed human body data with the method of medium type intermediate, basic analysis and analytic hierarchy process(AHP), and the size of each control factor of the standard human body model capable of covering most of the human body size of the type was obtained. The results showed that height, weight, chest circumference, waist circumference and shoulder width could be used as parameters to deduce the size of other control factors according to the garment size classification and regression equation. The sizes of the control factor refer to the value of medium type intermediate, and judge by combining the basic analysis method and the analytic hierarchy process. Finally, the representative data is chosen as the control position value of the parametric human body model.

参考文献/References:

[1] CORDIER F,SEO H,MAGNENAT-THALMANN N. Made- to-measure technologies for an online clothing store[J]. IEEE Computer Graphics and Applications,2003,23(1):38- 48.
[2] 郭梦洁,尚笑梅. 服用三维人体建模方法综述[J]. 现代丝绸科学与技术,2017,32(5):38- 40.
GUO Mengjie,SHANG Xiaomei. A review of three-dimensional human body modeling methods[J]. Modern Silk Science and Technology,2017,32(5):38- 40.(in Chinese)
[3] 张小妞,王军,张春媛.数字化服装三维人体建模方法综述[J].山东纺织科技,2018,59(3):44- 47.
ZHANG Xiaoniu,WANG Jun,ZHANG Chunyuan. Summary of 3D garment modeling methods in digital garment[J].Shandong Textile Science and Technology,2018,59(3):44- 47.(in Chinese)
[4] 张宏铭. 基于特征的三维服装人体参数化建模方法研究[D]. 厦门:厦门大学,2009.
[5] 崔树芹. 三维虚拟试衣系统中参数化人体建模技术的研究[D].武汉:华中科技大学,2006.
[6] 牛全林.上海地区90后少女体型与服装原型研究[D]. 上海:东华大学,2011.
[7] 邓椿山,李琴,周莉,等. 体型分析在观测服装号型适应性上的应用[J]. 纺织学报,2017,38(1):111-115.
DENG Chunshan,LI Qin,ZHOU Li,et al. Application of body shape analysis in observation of clothing size adaptability[J]. Journal of Textile Research,2017,38(1):111-115.(in Chinese)[8] 穆红,陆鑫,王殿富. 基于身高体重的辽宁男大学生校服号型[J]. 纺织学报,2012,33(1):107-110.

MU Hong,LU Xin,Wang Dianfu. Series of students uniform size design based on male college students’ height and weight in Liaoning Province[J]. Journal of Textile Research,2012,33(1):107-110.(in Chinese)
[9] BONA G D,SILVESTRI A,FORCINA A,et al. AHP-IFM target:an innovative method to define reliability target in an aerospace prototype based on analytic hierarchy process[J]. Quality and Reliability Engineering International,2017,33(8):1731-1751.
[10] SHANG X M,XING X Y,GAO P P. Hierarchical analysis method and model based data of controlling parts of the body for clothing[J]. Journal of Fiber Bioengineering and Informatics,2014,7(4):479- 494.
[11] 郑爱花,罗戎蕾,晁霞. 层次分析法在网购服装选择号型中的应用[J]. 浙江理工大学学报,2009,26(5):687- 690.
ZHENG Aihua,LUO Ronglei,CHAO Xia. The application of AHP approach to garment sizes selections[J]. Journal of Zhejiang Sci-Tech University,2009,26(5):687- 690.(in Chinese)
(责任编辑:沈天琦,邢宝妹)

相似文献/References:

[1]赵莉莉,王赛赛,陈敏之*.基于阶梯层次结构模型的合体女衬衫号型推荐方法[J].服装学报,2021,6(05):402.
　ZHAO Lili,WANG Saisai,CHEN Minzhi*.Clothing Size Recommendation Method Based on Ladder Hierarchy Model[J].Journal of Clothing Research,2021,6(04):402.

更新日期/Last Update: 2019-08-31