[1]杨瑞华,薛 元,王鸿博,等.牛仔面料用转杯纺纱线工艺分析与质量优化[J].服装学报,2017,2(06):471-477.
　YANG Ruihua,XUE yuan,WANG Hongbo,et al.Process Analysis and Quality Optimization of Rotor Spinning Yarn for Denim Fabric[J].Journal of Clothing Research,2017,2(06):471-477.
点击复制

牛仔面料用转杯纺纱线工艺分析与质量优化()
分享到：

《服装学报》[ISSN:2096-1928/CN:32-1864/TS]

卷:
第2卷
期数:
2017年06期
页码:
471-477
栏目:
服装材料科学
出版日期:
2017-12-31

文章信息/Info

Title:
Process Analysis and Quality Optimization of Rotor Spinning Yarn for Denim Fabric
作者:
杨瑞华;  薛 元;  王鸿博;  高卫东
江南大学 生态纺织教育部重点实验室,江苏 无锡 214122
Author(s):
YANG Ruihua;  XUE yuan;  WANG Hongbo;  GAO Weidong
Key Laboratory of Eco-Textiles, Ministry of Education, Jiangnan University,Wuxi 214122, China
分类号:
TS 101.2
文献标志码:
A
摘要:
转杯纺成纱器在牛仔面料生产中应用广泛,转杯及其凝聚槽类型是影响成纱特性的重要参数。探究不同直径的T型凝聚槽对转杯内气流场的影响,借助ANSYS有限元软件分析纺纱通道内气流场数值,并进行纺纱实验验证,优化成纱质量,提供面料服用性能。研究结果表明:在相同工艺条件下,凝聚槽一周(0°～360°)范围内,气流速度为T36型>T42型>T46型; 在20°～340°范围内,气流压力为T46型>T42型>T36型,即负压绝对值T36型>T42型>T46型,但在0°(即360°)位置处,由于纤维输送通道气压的冲击作用,使转杯内气流压力为T36型>T46型>T42型。3种直径的T型槽内气流静压和速度趋势基本一致,以直径42 mm的T型槽为例,转杯内的静压大部分为负压,位于-4.1～-10.8 kPa之间; 气流在纤维输送通道中加速运动,出口处的气流速度达到241 m/s; 3种不同直径T型转杯所纺纱线强力为T36型>T42型>T46型,断裂伸长率为T36型>T42型>T46型,条干不匀率为T46型>T42型>T36型,毛羽值为T46型>T42型>T36型。
Abstract:
Rotor spinning yarn is widely used in denim fabric production. During the rotor spinning process,rotor and groove are important parameters affecting the yarn characteristics.The mechanism of three different diameters of the T-slot rotor to high speed airflow during rotor spun yarn spinning process is investigated. Airflow speed and static pressure in three different diameters of T-slot rotor, such as 36 mm, 42 mm, 46 mm, are studied by finite element software ANSYS, and verified by experiments. The results showed that under the same conditions, speeds ranking in three different diameters of T type groove was:T36>T42>T46. At 0° and 360° positions, the static pressures were T36>T46>T42, and at the rest positions, they were T46>T42>T36. Taking T slot of 42 mm diameter as example, static pressures within the rotor were between -4.1 kPa and -10.8 kPa. The airstream accelerates from the transfer channel inlet to the outlet with the decrease of the pipe diameter, and reached the biggest-value to 241 m/s at the outlet. Yarn strength ranking was:T36>T42>T46, breaking elongation ranking was:T36>T42>T46, evenness(CV%)ranking was:T46>T42>T36, hairiness ranking was:T46>T42>T36.

参考文献/References:

[1] 张百祥,周慈念.转杯纺纱[M].北京:纺织工业出版社, 1993:61- 65.
[2] 刘超,杨瑞华,王鸿博,等. 转杯纺纱通道三维流场的数值模拟[J].纺织学报,2016,37(9):145-150.
LIU Chao, YANG Ruihua, WANG Hongbo,et al.Numerical simulation for 3-D flow field of rotor spinning channel[J].Journal of Textile Research, 2016,37(9):145-150.(in Chinese)
[3] 徐惠君,巴塔.转杯纺转杯的作用与选择[J].纺织导报,2015(6):64- 67.
XU Huijun, BA Ta. The role of rotor spinning rotor and selection[J]. China Textile Leader, 2015(6): 64- 67.(in Chinese)
[4] 杨瑞华,高卫东,王善元.转杯纺复合纱长丝与短纤复合点位置的建模与分析[J].纺织学报,2011,31(4):39- 42.
YANG Ruihua, GAO Weidong, WANG Shanyuan.Mathematic model of convergent point for rotor-spun composite yarn spinning process[J].Journal of Textile Research, 2011, 31(4):39- 42.(in Chinese)
[5] KONG L X, Platfoot R A. Fiber transportation in confined channel with recirculation[J]. Computers and Structures, 2000, 78(1): 237-245.
[6] 马开斌.影响转杯纺成纱强力的因素分析与改善措施[J].棉纺织技术,2014,42(9): 51-54.
MA Kaibin. Impact of spinning yarn into a powerful factor analysis and improvement measures[J]. Cotton Textile Technology, 2014,42(9): 51-54.(in Chinese)
[7] LIN H T, ZENG Y C, WANG J. Computational simulation of air flow in the rotor spinning unit[J]. Textile Research Journal, 2016, 86(2): 115-126.
[8] 王福军.计算流体动力学分析[M].北京:清华大学出版社,2004:7-9.
[9] 朱红均,林远华,谢龙汉.FLUENT流体分析及仿真实用教程[M].北京:人民邮电出版社,2010:237-238.
[10] 李慧暄,韩丽美, 胡继顺.转杯纺纱与环锭纺纱毛羽的比较及成因分析[J]. 吉林工学院学报(自然科学版), 1994,15(1): 65- 69.
LI Huixuan, HAN Limei, HU Jishun.Comparison of yarn hairiness resulted from rotor spinning and ring spinning with an analysis on its formation[J]. Journal of Jilin Institute of Technology(Nature Science), 1994, 15(1): 65- 69.(in Chinese)
(责任编辑:邢宝妹)

相似文献/References:

[1]杨瑞华,潘 博,陈 可,等.转杯纺竹节纱成形新方法与成纱特征[J].服装学报,2020,5(05):377.
　YANG Ruihua,PAN Bo,CHEN Ke,et al.New Spinning Method of Rotor Spun Slub Yarn and the Yarn Characteristics[J].Journal of Clothing Research,2020,5(06):377.

更新日期/Last Update: 2017-12-31