[1]郭燕雨秋,董智佳*,蒋高明,等.经编成形三列镂空网孔的形变分析与预测[J].服装学报,2023,8(03):217-222.
　GUO Yanyuqiu,DONG Zhijia*,JIANG Gaoming,et al.Deformation Analysis and Prediction of Warp-Knitted Fully-Formed Three-Columns’ Hollow Meshes[J].Journal of Clothing Research,2023,8(03):217-222.
点击复制

经编成形三列镂空网孔的形变分析与预测()
分享到：

《服装学报》[ISSN:2096-1928/CN:32-1864/TS]

卷:
第8卷
期数:
2023年03期
页码:
217-222
栏目:
针织服装
出版日期:
2023-06-30

文章信息/Info

Title:
Deformation Analysis and Prediction of Warp-Knitted Fully-Formed Three-Columns’ Hollow Meshes
作者:
郭燕雨秋;  董智佳*;  蒋高明;  姚思宏
江南大学 针织技术教育部工程研究中心,江苏 无锡 214122
Author(s):
GUO Yanyuqiu;  DONG Zhijia*;  JIANG Gaoming;  YAO Sihong
(Engineering Research Center for Knitting Technology, Ministry of Education,Jiangnan University, Wuxi 214122,China)
分类号:
TS 184.5
文献标志码:
A
摘要:
为拓展针织镂空服装的设计思路,参考市面上已有的三列镂空网孔服装,确定镂空网孔孔径、孔距、间距等可能影响三列镂空网孔形态的设计因素。采用控制变量法设计3组共18种样品,利用图像采集和处理的方式采集三列镂空网孔的形变数据进行分析。结果表明:镂空网孔孔径和间距影响三列镂空网孔的镂空宽度,与镂空宽度呈正相关,织物的横向伸长率越大,孔径对镂空宽度的影响越明显,而间距增加对镂空宽度的影响较小; 镂空网孔孔径和间距同样会影响三列镂空网孔中单个镂空网孔的横径,其中孔径与横径呈正相关,间距与横径呈负相关; 三列镂空网孔中各位置的镂空网孔形状固定,其中顶孔和侧孔为扇形孔,中孔为多边形孔,各孔横径排序为中孔>顶孔>侧孔。
Abstract:
In order to expand the design idea of knitted hollow clothing, the design and deformation of warp-knitted fully-formed three-columns’ hollow meshes were analyzed and predicted. Take the clothing with three-columns’ hollow meshes in the market as reference, the design factors that may affect the shape of the three-columns’ hollow meshes were determined, such as number of mesh grids, number of vertically spacing grids and number of transverse spacing grids. Three groups total of 18 samples were designed by the control variate method. The deformation data of the three-columns’ hollow meshes were collected and analyzed by image acquisition and processing. The results show that the number of grids and number of transverse spacing grids affect the width of three-columns’ hollow meshes. The number of grids and number of transverse spacing grids are positively correlated with the width of three-columns’ hollow meshes. The greater the transverse elongation of the fabric, the more obvious the influence of aperture on the width of three-columns’ hollow meshes; the increase of spacing has little influence on the width of three-columns’ hollow meshes. The number of grids and number of transverse spacing grids also affect the transverse diameter of each single hollow mesh, in which the number of grids is positively correlated with the transverse diameter, while the number of transverse spacing grids is negatively correlated with transverse diameter. The shape of hollow meshes at each position in the three-columns’ hollow meshes are fixed. The top meshes and the side meshes are fan-shaped holes, and the middle meshes are polygonal. The transverse diameter of each hole is ordered as: middle meshes> top meshes > side meshes.

参考文献/References:

[1] 张欣茹. 浅析镂空艺术在现代服装设计中的应用[J]. 西部皮革, 2021, 43(12): 38-39.
ZHANG Xinru. A brief analysis of the application of hollow out art in modern costume design[J]. West Leather, 2021, 43(12): 38-39.(in Chinese)
[2] 简晚霞, 张琦, 董智佳. 经编无缝无底连裤袜全成形工艺[J]. 服装学报, 2017, 2(3): 224-228.
JIAN Wanxia, ZHANG Qi, DONG Zhijia. Fully-fashioned technology for warp-knitted seamless bottomless pantyhose[J]. Journal of Clothing Research, 2017, 2(3): 224-228.(in Chinese)
[3] 龙素乔, 顾远渊, 潘海音. 高弹针织面料在服装造型中的应用研究[J]. 针织工业, 2021(1): 70-73.
LONG Suqiao, GU Yuanyuan, PAN Haiyin. Application study of high-elastic knitted fabrics in creative costumes[J]. Knitting Industries, 2021(1): 70-73.(in Chinese)
[4] 董智佳, 蒋高明. 经编提花无缝服装的成形结构与设计方法[J]. 纺织学报, 2012, 33(1):102-106, 120.
DONG Zhijia, JIANG Gaoming. Shaping structure and design method of warp knitted jacquard seamless garment[J]. Journal of Textile Research, 2012, 33(1):102-106, 120.(in Chinese)
[5] 刘博, 丛洪莲. 四针床全成形休闲西服的工艺设计与成形原理[J]. 纺织学报, 2020, 41(4)129-134.
LIU Bo, CONG Honglian. Process design and knitting principle of one-piece casual suits based on four-needle-bed flat knitting machine[J]. Journal of Textile Research, 2020, 41(4)129-134.(in Chinese)
[6] 董智佳, 孙菲, 丛洪莲, 等. 经编成形运动服装开发现状与应用前景[J]. 纺织导报, 2021(7): 45- 48.
DONG Zhijia, SUN Fei, CONG Honglian, et al. Deve-lopment status and application prospects of warp-knitted fashioned sportswear[J]. China Textile Leader, 2021(7): 45- 48.(in Chinese)
[7] 邹亚男, 夏风林, 董智佳, 等. 经编成形高领T恤部件设计与建模[J]. 上海纺织科技, 2022, 50(5): 44- 49.
ZOU Yanan, XIA Fenglin, DONG Zhijia, et al. Component design and modeling of warp-knitted high-neck T-shirt[J]. Shanghai Textile Science and Technology, 2022, 50(5): 44- 49.(in Chinese)
[8] 董智佳, 夏风林, 丛洪莲. 双针床贾卡经编机全成形技术研究进展[J]. 纺织导报, 2017(7): 58- 61.
DONG Zhijia, XIA Fenglin, CONG Honglian. Research progress on seamless knitting technology for double needle bar warp knitting machine[J]. China Textile Leader, 2017(7): 58- 61.(in Chinese)
[9] 董智佳, 孙菲, 刘海桑, 等. 经编全成形服装产品开发与数字化技术[J]. 毛纺科技, 2021, 49(5):44- 48.
DONG Zhijia, SUN Fei, LIU Haisang, et al. Product development and digital technology of warp knitted fully-fashioned garment[J]. Wool Textile Journal, 2021, 49(5):44- 48.(in Chinese)
[10] 蒋高明. 经编针织物生产技术:经编理论与典型产品[M]. 北京: 中国纺织出版社, 2010.
(责任编辑:邢宝妹)

更新日期/Last Update: 2023-06-30