[1]李淑敏,刘静静.贴体服装前后胸围及袖窿门宽的分配方法[J].服装学报,2016,1(05):492-496.
　LI Shumin,LIU Jingjing.Allocation Method of Front and Back Bust and Armhole Width in Fitted Clothing[J].Journal of Clothing Research,2016,1(05):492-496.
点击复制

贴体服装前后胸围及袖窿门宽的分配方法()
分享到：

《服装学报》[ISSN:2096-1928/CN:32-1864/TS]

卷:
第1卷
期数:
2016年05期
页码:
492-496
栏目:
服装工程技术
出版日期:
2016-10-30

文章信息/Info

Title:
Allocation Method of Front and Back Bust and Armhole Width in Fitted Clothing
作者:
李淑敏;  刘静静
1.江西服装学院 服装设计分院,江西 南昌 330201; 2.江西服装学院 江西省现代服装工程技术研究中心,江西 南昌 330201
Author(s):
LI Shumin;  LIU Jingjing
1.Clothing Design Institute Jiangxi Institute of Fashion Technology,Nanchang 330201,China; 2.Jiangxi Centre for Modern Apparel Engineering and Technology,Jiangxi Institute of Fashion Technology,Nanchang 330201,China
分类号:
TS 941.2
文献标志码:
A
摘要:
为满足消费者希望通过服装凸显身体曲线的需求,解决非弹性面料在很小放松量的情况下,保证成品胸围尺寸和袖窿门宽度的问题。通过对新旧文化原型成品胸围尺寸、背宽、胸宽、袖窿门宽以及人体腋窝围、腋窝宽、腋窝深的分析,推算得出在贴体服装中前、后胸围的分配公式。对推算结果,利用三维试衣软件对人体与服装的距离进行分析验证,结果表明该制图公式不仅能补足贴体服装胸围的损耗,而且可以保证前后袖窿门的宽度近似相等,且袖窿门不小于最小宽度4 cm,可保证贴体服装袖底部位的穿着舒适。
Abstract:
In order to satisfy consumers’ need to use clothing to highlight body curve, the current paper is aimed to explore the possibility of ensuring the bust girth and the armhole width of the finished product being no less than the minimum armhole width even under the situation that the ease allowance is very limited for inflexible fabrics. Through the deep analysis of the bust girth, back width, bust width, front of armhole of both the previous and current standard patterns, and the axillary girth, axillary width and axillary depth of human body, the allocation equation of the front and back bust girth of fitted clothing has been proposed. The darts are determined as the bust darts. The obtained results have been verified by analyzing the distance between human body and the clothes using 3D fitting software. According to the results, the obtained equation not only will complement the loss of bust girth of fitted clothes, but also can ensure that the approximately consistency between the width of front and back armhole, and that the minimum width of armhole will not be less than 4 cm, so as to ensure the wearing comfort of fitted clothes at the bottom of the sleeve.

参考文献/References:

[1] 孟凡瑜,王国彩.非弹力及弹力面料在合体服装中的运用[J].科技创新导报,2011(11):70.MENG Fanyu,WANG Guocai.Elastic and elastic fabric used in the form-fitting dress
[J].Science and Technology Innovation Herald,2011(11):70.(in Chinese)
[2] 温兰.弹性面料的外观效果与服装风格设计[J].辽宁丝绸,2006(3):12.
WEN Lan.Elastic fabric appearance and clothing style design[J].Liaoning Silk,2006(3):12.(in Chinese)
[3] 石春乐,刘冠彬,张文斌.袖山高与衣袖造型的配伍关系研究[J].西安工程科技学院学报,2006(3):284-287.
SHI Chunle,LIU Guanbin,ZHANG Wenbin.Study on the relationship between the sleeve height and the compati- bility of sleeves[J].Journal of Xi’an Institute of Engineering Technology,2006(3):284-287.(in Chinese)
[4] 郑小飞.女装合体袖的衣身袖窿造型试验研究[J].轻纺工业与技术,2011(6):63- 65.
ZHENG Xiaofei.Dress fit garment body of the sleeve cuff cage modelling experimental study[J].Journal of Light Spinning Industry and Technology,2011(6):63- 65.(in Chinese)
[5] 王璇.服装放松量的分析研究[J].纺织学报,2005(8):126-128.
WANG Xuan.The analysis and research of the relaxation of the clothing[J].Journal of Textile,2005(8):126-128.(in Chinese)
[6] 三吉满智子.服装造型学[M].郑嵘,张浩,韩洁羽,译.北京:中国纺织出版社,2008:158.
[7] 薛福平.日本文化女装新原型构成要素与造型的关系[J].纺织学报,2007,28(10):91-94.
XUE Fuping.This cultural elements and modeling the relationship between[J].Journal of Textile,2007,28(10):91-94.(in Chinese)
[8] 李文杰.针织服装设计[M].北京:轻工业出版社,1990:33-34.
[9] 中泽愈.人体与服装[M].袁观洛,译.北京:中国纺织出版社,2005:157.
[10] 甘应进,刘辉,姜岩,等.原型袖窿结构的设计[J].纺织学报,2001,22(2): 49-50.
GAN Yingjin,LIU Hui,JIANG Yan,et al.Prototype armhole structure design[J].Journal of Textile,2001,22(2):49-50.(in Chinese)
(责任编辑:卢 杰,邢宝妹)

更新日期/Last Update: 2016-10-30