[1]赵晓露,罗 云,沈津竹,等.基于工业工程的皮夹生产线仿真与优化[J].服装学报,2022,7(02):115-121.
　ZHAO Xiaolu,LUO Yun,SHEN Jinzhu,et al.Simulation and Optimization of Wallet Production Line Based on Industrial Engineering[J].Journal of Clothing Research,2022,7(02):115-121.
点击复制

基于工业工程的皮夹生产线仿真与优化()
分享到：

《服装学报》[ISSN:2096-1928/CN:32-1864/TS]

卷:
第7卷
期数:
2022年02期
页码:
115-121
栏目:
服装信息与工程
出版日期:
2022-04-30

文章信息/Info

Title:
Simulation and Optimization of Wallet Production Line Based on Industrial Engineering
作者:
赵晓露1;  罗 云2;  沈津竹1;  罗玉兰3;  苏军强*1
1.江南大学 纺织科学与工程学院,江苏 无锡 214122; 2.安徽金寨职业学校 服装系,安徽 六安 237300; 3.上海秒优供应链管理有限公司,上海 200082
Author(s):
ZHAO Xiaolu1;  LUO Yun2;  SHEN Jinzhu1;  LUO Yulan2;  SU Junqiang*1
1.College of Textile Science and Engineering,Jiangnan University,Wuxi 214122,China; 2.Clothing Department,Anhui Jinzhai Vocational School,Lu’an 237300,China; 3.Shanghai MU Supply Chain Management Co., Ltd.,Shanghai 200082, China
分类号:
TS 941.63
文献标志码:
A
摘要:
为了改善皮夹生产线中经常出现的员工等待、在制品堆积等现象,提高皮夹的生产效率及流水线的编制效率,将A皮具公司两折皮夹生产线作为研究对象,在深入了解皮夹工艺流程和作业方法的基础上,运用工业工程技术分析该生产线,并提出改善方案,利用Flexsim仿真软件对改善方案进行效果分析与评价。结果显示:优化后的皮夹流水编制效率提高了19.9%,在生产时间与作业人员数量不变的前提下,日产量平均增加8个; 各工位的资源利用率和作业时间相符,优化模型的仿真效果达到设计要求。
Abstract:
In order to improve the phenomenon of employee waiting and product accumulation in the wallet production line, and improve the production efficiency of the wallet and the efficiency of the assembly line, the leather goods production line of Leather Company A was taken as the research object, and the wallet process was deeply understood. On the basis of the operation method, the production line was analyzed by industrial engineering technology, and the improvement plan was proposed. The effect analysis and evaluation of the improvement scheme were carried out by using Flexsim simulation software. The results show that the efficiency of the optimized wallet assembly line is increased by 19.9%, and when the production time and the number of workers are the same, the daily output is increased by 8 on average. The resource utilization rate of each station is consistent with the operation time. The simulation effect of the model meets the design requirements.

参考文献/References:

[1] 陈东生, 郑玮. 服装生产管理学[M]. 上海: 东华大学出版社, 2015: 60- 62.
[2] 许栋樑. 基于精益生产理论的服装流水线优化研究[J]. 北京服装学院学报(自然科学版), 2017, 37(4): 68-75.
XU Dongliang. Optimization of clothing assembly line based on lean production theory[J]. Journal of Beijing Institute of Clothing Technology(Natural Science Edition), 2017, 37(4): 68-75.(in Chinese)
[3] 孙影慧, 杜劲松. 服装单件流水线的Flexsim仿真[J]. 纺织学报, 2018, 39(6): 155-161, 166.
SUN Yinghui, DU Jinsong. Simulation of one-piece flow garment assembly line based on Flexsim software[J]. Journal of Textile Research, 2018, 39(6): 155-161, 166.(in Chinese)
[4] 刘谣. 基于ProModel仿真系统的服装混合流水线平衡优化[D]. 上海: 东华大学, 2015: 35- 44.
[5] 张梦雨, 黄河, 杨以雄, 等. 基于0-1规划的成衣制造流水线平衡建模与仿真[J]. 毛纺科技, 2018, 46(5): 46-51.
ZHANG Mengyu, HUANG He, YANG Yixiong, et al. Garment manufacturing line balance modeling and simulation based on 0-1 programming[J]. Wool Textile Journal, 2018, 46(5): 46-51.(in Chinese)
[6] 胡明茂, 李峰. 基于单元化“一个流”生产方式的曲轴生产线优化与仿真[J]. 现代制造工程, 2018(3): 86-92.
HU Mingmao, LI Feng. Simulation and optimization of the crankshaft production line based on "one-piece flow" cell production mode[J]. Modern Manufacturing Engineering, 2018(3): 86-92.(in Chinese)
[7] 孙影慧, 杜劲松. 服装单件生产流水线仿真优化[J]. 东华大学学报(自然科学版), 2019, 45(2): 236-242.
SUN Yinghui, DU Jinsong. Simulation and optimization of single garment production line[J]. Journal of Donghua University(Natural Science), 2019, 45(2): 236-242.(in Chinese)
[8] 秦天保, 周向阳. 实用系统仿真建模与分析:使用Flexsim[M]. 北京: 清华大学出版社, 2016: 7.
[9] 徐燕妮, 周海媚, 王立川, 等. 服装缝制流水线仿真与评价指标[J]. 纺织学报, 2015, 36(12): 146-151.
XU Yanni, ZHOU Haimei, WANG Lichuan, et al. Simulation of clothing sewing line and evaluation indexes[J]. Journal of Textile Research, 2015, 36(12): 146-151.(in Chinese)
[10] ERYURUK S H. Clothing assembly line design using simulation and heuristic line balancing techniques[J]. Tekstil Ve Konfeksiyon, 2012, 22(4): 360-368.
(责任编辑:沈天琦)

更新日期/Last Update: 2022-04-30