[1]王建萍,张宇婷,郑牧青,等.超声波无痕压胶参数对针织运动装缝口性能的影响[J].服装学报,2021,6(05):377-383.
　WANG Jianping,ZHANG Yuting,ZHENG Muqing,et al.Effect of Ultrasonic Non-Trace Pressing Parameters on the Performance of Knitted Sports Seam[J].Journal of Clothing Research,2021,6(05):377-383.
点击复制

超声波无痕压胶参数对针织运动装缝口性能的影响()
分享到：

《服装学报》[ISSN:2096-1928/CN:32-1864/TS]

卷:
第6卷
期数:
2021年05期
页码:
377-383
栏目:
服装材料与技术
出版日期:
2021-10-30

文章信息/Info

Title:
Effect of Ultrasonic Non-Trace Pressing Parameters on the Performance of Knitted Sports Seam
作者:
王建萍1; 2;  张宇婷1; 2;  郑牧青3;  袁鲁宁1; 2;  张舒杨1
1.东华大学 服装与艺术设计学院,上海 200051; 2.现代服装设计与技术教育部重点实验室(东华大学),上海 200051; 3. 奎丽空间运动科技(上海)有限公司,上海 200040
Author(s):
WANG Jianping1; 2;  ZHANG Yuting1; 2;  ZHENG Muqing3;  YUAN Luning1; 2;  ZHANG Shuyang1
1. College of Fashion and Design, Donghua University, Shanghai 200051, China; 2. Key Laboratory of Clothing Design and Technology, Ministry of Education, Donghua University,Shanghai 200051, China; 3. Quelea Space Sports Technology(Shanghai), Shanghai 200040,China
分类号:
TS 941.65
文献标志码:
A
摘要:
为提高针织运动装无痕缝口性能并优化超声波无痕压胶工艺参数,选取锦氨纬编针织运动面料,以接缝强力和胶条剥离强度为缝口性能评价指标对超声波振幅、花轮速度、热风温度和风嘴气压工艺参数设计单因素实验。通过单因素方差和多元线性回归方法分析工艺参数对缝口性能的影响,并用SEM电镜观察缝口的微观形貌。结果表明:无痕缝口性能较佳的工艺参数为超声波振幅30%～40%,花轮速度100～150 cm/min,热风温度310 ℃,风嘴压力0.08 MPa; 接缝强力与超声波振幅、花轮速度和风嘴气压有较显著的线性关系,剥离强力与热风温度和风嘴气压有极其显著的线性关系; 从微观角度看,胶条与面料之间空隙越小,有效黏结面积越大,缝口性能越好。
Abstract:
In order to improve the seamless seam performance of knitted sportswear and optimize the process parameters of ultrasonic seamless pressing, the nylon/polyurethane weft knitted sportswear fabric was selected, and the seam strength and adhesive film peeling strength were taken as the seam performance evaluation indexes. The ultrasonic amplitude, wheel speed, hot air temperature and air pressure of air nozzle were designed by single factor test. Single factor variance and multiple linear regression were used to analyze the effect of process parameters on the seam properties, and the microstructure of the seam was observed by SEM. The results show that the best technological parameters of seamless seam are ultrasonic amplitude 30%～40%, wheel speed 100～150 cm/min, hot air temperature 310 ℃, nozzle pressure 0.08 MPa. There is a significant linear relationship between seam strength and ultrasonic amplitude, wheel speed and air pressure of nozzle, and there is a significant linear relationship between peel strength and hot air temperature and air pressure of nozzle. It is found that the smaller the gap between the strip and the fabric, the larger the effective bonding area, and the better the seam performance.

参考文献/References:

[1] 周楠, 蒋晓文, 王雪婷. 基于生物力学的运动防护服装研究进展[J]. 服装学报, 2020, 5(3): 210-215.
ZHOU Nan, JIANG Xiaowen, WANG Xueting. Research progress of sports protective clothing based on biomecha-nics[J]. Journal of Clothing Research, 2020, 5(3): 210-215.(in Chinese)
[2] 蒋培清, 赖毅飞, 陈献珊. 超声波缝合涤纶织物缝口的力学性能[J]. 纺织学报, 2013, 34(10): 127-130.
JIANG Peiqing, LAI Yifei, CHEN Xianshan. Seam mechanical properties of polyester fabric welded by ultrasonic sewing machine[J]. Journal of Textile Research, 2013, 34(10): 127-130.(in Chinese)
[3] 崔志英, 郑蓉梅, 张好恬. 热熔接针织服装接缝性能研究[J]. 针织工业, 2019(12): 81-83.
CUI Zhiying, ZHENG Rongmei, ZHANG Haotian. Study of seam performance of hot welding kintted garment[J]. Knitting Industries, 2019(12): 81-83.(in Chinese)
[4] 刘思寒, 许君, 马大力, 等. 服装焊接工艺的关键技术及在服装领域应用进展[J]. 纺织导报, 2020(4): 76-79.
LIU Sihan, XU Jun, MA Dali, et al. Key technology of fusible process and its application in garments[J]. China Textile Leader, 2020(4): 76-79.(in Chinese)
[5] 王琴华. 户外运动服装中超声波无缝技术的应用探析[J]. 当代旅游, 2018, 16(5): 131.
WANG Qinhua.Application of ultrasonic seamless technology in outdoor sportswear[J]. Tourism Today, 2018, 16(5): 131.(in Chinese)
[6] 史慧. 基于力学性能的户外服装防水缝口质量研究 [D].上海:东华大学,2016.
[7] 薛兆磊, 钟智丽, 孙涵, 等. 超声波层合织物技术现状与应用[J]. 西部皮革, 2018, 40(20): 7.
XUE Zhaolei, ZHONG Zhili, SUN Han, et al.Current situation and application of ultrasonic laminated fabric technology[J]. West Leather, 2018, 40(20): 7.(in Chinese)
[8] SHI H, WANG J P, CHEN X N, et al. Research on the seam performance of waterproof clothing based on conti-nuous ultrasonic welding technology[J]. International Journal of Clothing Science and Technology, 2016, 28(2): 171-190.
[9] 史慧, 陈思, 李卫平, 等. 超声波熔接参数对户外服缝口防水性能影响[J]. 东华大学学报(自然科学版), 2019, 45(1): 39- 44.
SHI Hui, CHEN Si, LI Weiping, et al. Effects of ultrasonic welding parameters on waterproof performance of outdoor clothing seam[J]. Journal of Donghua University(Natural Science), 2019, 45(1): 39- 44.(in Chinese)
[10] 王琴华, 陈泓. 超声波无缝压胶缝合防泼水织物缝口的防水性能[J]. 科技视界, 2018(12): 46- 47.
WANG Qinhua, CHEN Hong. Waterproof property of waterproofing fabric by ultrasonic and hot melt adhesive sewing[J]. Science and Technology Vision, 2018(12): 46- 47.(in Chinese)
[11] CHELSEA K A.Development of fabric seaming for clothing using ultrasonic sealing technique[D].Michigan:Eastern Michigan University,2009.
[12] SERAM N, CABON D. Investigating the possibility of constructing different seam types for clothing using ultrasonic[J]. International Journal of Clothing Science and Technology, 2013, 25(2): 90-98.
[13] 王磊. 大型铸锻件超声无损检测技术研究[D]. 石家庄: 河北科技大学, 2013.(责任编辑:邢宝妹)

相似文献/References:

[1]王建萍,郝 赟,朱晶晶,等.基于靛蓝纱的色织面料设计及水洗性能对比[J].服装学报,2017,2(03):189.
　WANG Jianping,HAO Yun,ZHU Jingjing,et al.Design of the Yarn Dyed Fabric Based on the Indigo Yarn and Performance Pnalysis of Its Washing Properties[J].Journal of Clothing Research,2017,2(05):189.
[2]宋晓霞,陈秀玲.基于折叠结构的负泊松比纬编针织物设计[J].服装学报,2023,8(01):37.
　SONG Xiaoxia,CHEN Xiuling.Design of Weft Knitted Fabric with Negative Poisson’s Ratio Based on Folded Structure[J].Journal of Clothing Research,2023,8(05):37.

更新日期/Last Update: 2021-10-30