[1]于欣禾,王建萍*.基于虚拟服装压力的针织骑行服样板优化方法[J].服装学报,2019,4(02):127-135.
　YU Xinhe,WANG Jianping*.Optimization Method of Knitted Cycling Clothes’ Patterns Based on Virtual Clothing Pressures[J].Journal of Clothing Research,2019,4(02):127-135.
点击复制

基于虚拟服装压力的针织骑行服样板优化方法()
分享到：

《服装学报》[ISSN:2096-1928/CN:32-1864/TS]

卷:
第4卷
期数:
2019年02期
页码:
127-135
栏目:
服装工程技术
出版日期:
2019-04-28

文章信息/Info

Title:
Optimization Method of Knitted Cycling Clothes’ Patterns Based on Virtual Clothing Pressures
作者:
于欣禾1;  王建萍*1; 2
1.东华大学 服装与艺术设计学院,上海 200051; 2. 同济大学 上海国际设计创新研究院,上海 200092
Author(s):
YU Xinhe1;  WANG Jianping*1; 2
1.Fashion and Design Institute,Donghua University,Shanghai 200051,China; 2. Shanghai International Institute of Design and Innovation, Tongji University, Shanghai 200092, China
分类号:
TS 941.17; TS 941.731
文献标志码:
A
摘要:
为提升功能性针织服装动态压力舒适性,以女式针织骑行服为例,以160/84A虚拟模特为研究对象,采用虚拟试穿的方法,使用CLO 3D虚拟试穿软件测得69个测量点在静立状态及骑行动态下的静、动态虚拟压力值。分析静、动态服装压力的变化规律,提出基于静、动态服装压力差值的服装样板优化方法,进行骑行服样板优化设计。最终提出优化程度的概念,对优化结果进行验证。结果表明:优化后动态服装压力值总体下降61.94%,压力曲线平缓,所提出的样板优化方法显著提高了服装动态压力舒适性。该方法为基于动态压力舒适性的功能性针织服装样板优化提供新思路。
Abstract:
In order to improve the dynamic pressure comfort of functional knitted apparel, a pattern optimization method based on dynamic and static clothing pressure difference was put forward and applied to the optimization design of women’s knitted cycling clothes. Firstly, the virtual try-on experiment was carried out to measure the static and dynamic virtual pressure values of the 69 pressure measurement points under the static posture and riding posture on 160/84A avatar. Secondly, the variation regularity of the pressure difference was analyzed to optimize the pattern. The concept of optimization degree was proposed to verify the optimization results. The experimental results show that the method of garment pattern optimization based on the static and dynamic clothing pressure difference can significantly improve the dynamic pressure comfort of the garment. The optimized dynamic pressure of the garment decreases by 61.94%, and the curve tends to be gentle. The method provides a scientific basis for the pattern optimization method based on dynamic pressure.

参考文献/References:

[1] 孟祥令,张渭源. 服装压力舒适性的研究进展[J]. 纺织学报,2006,27(7):109-112.
MENG Xiangling, ZHANG Weiyuan.Progress of study on pressure comfort of clothing[J]. Journal of Textile Research,2006,27(7):109-112.(in Chinese)
[2] FAN J, YU W, HUNTER L. Clothing appearance and fit:science and technology[M]. Cambridge:Woodhead Publishing,2004.
[3] 常丽霞. 自行车运动服装的舒适性与功能性研究[J]. 针织工业, 2014(6):60- 63.
CHANG Lixia. A research on comfort and functionality of cycling wears[J]. Knitting Industries,2014(6):60- 63.(in Chinese)
[4] 李红燕,张渭源,李俊.功能服装的研究综述[J].丝绸, 2007,44(4):45- 47.
LI Hongyan, ZHANG Weiyuan, LI Jun. Literature review of functional clothing[J].Journal of Silk, 2007,44(4):45- 47.(in Chinese)
[5] 尹玲,张文斌,夏蕾. 服装压力舒适性的研究综述与剖析[J]. 纺织学报, 2008, 29(3):137-142.
YIN Ling, ZHANG Wenbin, XIA Lei. Review and analysis of pressure comfort of garment[J]. Journal of Textile Research, 2008, 29(3):137-142.(in Chinese)
[6] ZHANG Mei, DONG Henan, FAN Xuerong, et al. Finite element simulation on clothing pressure and body deformation of the top part of men’s socks using curve fitting equations[J]. International Journal of Clothing Science and Technology, 2015, 27(2):207-220.
[7] WONG A S W,LI Y,ZHANG X. Influence of fabric mechanical property on clothing dynamic pressure distribution and pressure comfort on tight-fit sportswear[J]. Fiber, 2004, 60(10):293-299.
[8] LIU Kaixuan, WANG Jianping, YAN Hong. Wearing comfort analysis from aspect of numerical garment pressure using 3D virtual-reality and data mining technology[J].International Journal of Clothing Science and Technology, 2017, 29(2):166-179.
[9] 姚彤, 白晓帆, 伞文,等. 基于CLO 3D平台的数字化服装设计[J]. 山东纺织科技, 2017, 58(2):41- 44.
YAO Tong, BAI Xiaofan, SAN Wen, et al. Digital clothing design based on CLO 3D platform[J]. Shandong Textile Science and Techonolgy, 2017, 58(2):41- 44.(in Chinese)
[10] 朱庆艳. EMTM背景下生活装旗袍的样板自动生成系统研究[D]. 杭州:浙江理工大学, 2017.
[11] 姜伟, 林凯亮. 浅析CLO 3D在内衣设计上的运用[J]. 辽宁丝绸, 2017(3):26-28,58.
JIANG Wei, LIN Kailiang. Application of CLO 3D in underwear design[J]. Liaoning Tussah Silk, 2017(3):26-28,58.(in Chinese)
[12] 穆淑华, 曹卫群. 基于CLO 3D的虚拟服装设计[J]. 电子科学技术, 2015,2(3):366-371.
MU Shuhua, CAO Weiqun. Virtual fashion design with CLO 3D[J]. Electronic Science and Technology, 2015,2(3):366-371.(in Chinese)
[13] 罗兰, 王建萍. 基于人体动作捕捉的骑行运动腿部皮肤形变研究[J]. 浙江纺织服装职业技术学院学报, 2014, 13(4):39- 43.
LUO Lan, WANG Jianping. Skin deformation of legs in cycling based on human motion capture(HMC)[J]. Journal of Zhejiang Fashion Institute of Technology, 2014,13(4):39- 43.(in Chinese)
[14] 李鑫, 赵欲晓. 北京地区骑行爱好者状况及对骑行服需求研究[J]. 纺织科技进展,2016(11):44- 48.
LI Xin, ZHAO Yuxiao. Research of cycling amateurs’ condition and the requirement for cycling jerseys in Beijing area[J]. Progress in Textile Science and Technology,2016(11):44- 48.(in Chinese)
[15] SHISHOO R. Textiles in Sport[M].Cambridge: Woodhead Publishing,2005:1-11.
[16] 张海红. 新型骑行上衣的研制[J]. 针织工业,2006(2):29-31.
ZHANG Haihong. An investigation on the new type cycling coat[J]. Knitting Industries, 2006(2): 29-31.(in Chinese)
[17] 赵锦. 自行车骑行服的设计与生产[D].苏州:苏州大学,2009.
[18] 李秀青, 刘需, 赵欲晓. 骑行运动中男子下肢体表尺寸变化规律[J]. 纺织学报, 2017, 38(8):120-126.
LI Xiuqing, LIU Xu, ZHAO Yuxiao. Study on size changes of man’s lower limb body in riding motion[J]. Journal of Textile Research, 2017, 38(8):120-126.(in Chinese)
[19] WANG Y J, MOK P Y, LI Y, et al. Body measurements of Chinese males in dynamic postures and application[J]. Applied Ergonomics, 2011, 42(6):900-912.
[20] 田伟,陈琳,周捷. 户外运动装衣袖结构设计[J]. 西安工程大学学报,2010,24(6):743-746,751.
TIAN Wei, CHEN Lin, ZHOU Jie. The sleeve structural design of the outdoor sportswear[J]. Journal of Xi’an Polytechnic University,2010,24(6):743-746,751.(in Chinese)
[21] 张文斌,方方. 服装人体工效学[M]. 上海:东华大学出版社,2015.
[22] 伯特. Bike Fit: 骑行姿势设定指南[M]. 张光准,译. 北京: 人民邮电出版社, 2015: 4.
(责任编辑:沈天琦,邢宝妹)

更新日期/Last Update: 2018-04-26